+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 40 of 95

Thread: Cranky's overworld sprites

  1. #1
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default Cranky's overworld sprites

    Lupine.PNGCirroft.PNGHey guys. I've decided that I am going to be working on the overworld sprites for topaz pokemon. I am currently working on Cirroft and Lupine, and after that Mogel and Ampure. They still need to be shaded and everything, but for now here they are. Criticism?
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  2. #2
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Double post. Here is the smaller Cirroft that IB wanted in the questions thread. And I accidently posted this on Topaz Pokemon. Can anyone move it to the Topaz graphics?
    Attached Images
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  3. #3
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    Believe it or not, this actually belongs in Topaz Pokemon. It's misleading, but Graphics is generally for banners, concept art, and non-game related graphics, as well as trainer sprites and such. Anything with in-game Pokemon development goes here, so it's in the right place.

    Your shrinking of Cirroft is successful! The size should be about fine now.

  4. #4
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    That's good to hear. Here's Lupine with big leaves. Should I make the leaves smaller, or can I shade it already? Cirroft is almost done with shading and should be done by tomorrow.
    Attached Images
    Last edited by Cranky Guy; 12-01-11 at 04:26 PM.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  5. #5
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    The leaves on the front and back poses seem too big, but the side poses seem fine.

  6. #6
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    OK. That means I just have to resize the leaves and than I can already shade it.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  7. #7
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Double post. Made the leaves smaller, but not too small, cause lupine's sprite has only a few leaves.

    Lupine.PNG
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  8. #8
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    Only Problem I have, this far, is that the front overworld for Lupin seems like it's facing up at the player too much. Normally, you can see other parts of the body from the front.
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  9. #9
    Better Than That Guy
    Black Temple Gaurdian's Avatar
    Status: Black Temple Gaurdian is offline
    Join Date: Dec 2009
    Posts: 733

    Default

    Quote Originally Posted by NyteFyre View Post
    Only Problem I have, this far, is that the front overworld for Lupin seems like it's facing up at the player too much. Normally, you can see other parts of the body from the front.
    Likewise with the one facing down. Otherwise we'll have lupine's that constantly faceplant themselves in the ground. :P

  10. #10
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Now that you mention it......... I'll work on that. Thx!
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  11. #11
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    My Cirroft has been ready for quite a while now, although the shading is not really perfect. I just can't seem to grab a hold of it. What do YOU think?

    Cirroft.PNG
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  12. #12
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    It may just be me, but the face seems a little......plain? stick figure-ish? The face itself just doesn't seem to have a whole lot of depth to it. I understand that while working with such small sprites, it's hard to get in a lot of detail, but something about the eyes and smile seem plain and not like Cirroft at all.
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  13. #13
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    Could you try using a slightly lighter shade of blue for the shading> Also, can you raise the entire sprite higher in its frame so Cirroft is higher off the ground?

  14. #14
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    I tried to remake the Cirroft sprite so it looks like it's floating, and raised it higher in it's frame.

    Cirroft.PNG

    I know it looks really plain, but Cirroft's just too small work with. Change the eyes, they look weirdly proportioned. Same goes with the smile. There's not much that I can do to make it look "not plain".
    Last edited by Cranky Guy; 12-07-11 at 12:08 PM.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  15. #15
    Better Than That Guy
    Black Temple Gaurdian's Avatar
    Status: Black Temple Gaurdian is offline
    Join Date: Dec 2009
    Posts: 733

    Default

    It's looks fine. Although when it faces up you need more shading, and the wings should attach more central to the middle of the back (if that makes any sense).

  16. #16
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    The shade is now too light. If you could find a good middle ground that'd be great.

  17. #17
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    I tried to make the shade brighter, and I changed the position of the wings. Also added shading to the front sprite.

    Cirroft.PNG
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  18. #18
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    A little darker than that even please?

  19. #19
    Spriter and Gym designer
    Tyrannigon64's Avatar
    Status: Tyrannigon64 is offline
    Join Date: Nov 2010
    Location: Over there
    Posts: 764

    Default

    I personally think both shades should have a lower saturation.

  20. #20
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    Agreed. Though try the shade first though because once you establish a contrast things can seem different.

  21. #21
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  22. #22
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    That doesn't seem much different from the original now does it? Oh well.

  23. #23
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    After trying this and that for a while, here's Cirroft. (again)

    Cirroft.PNG

    And this is my progress on Lupine. It's difficult to add a tail to the front sprite cause the sprite becomes huge. And the only thing I have added to the backsprite (so far) are ears.

    Lupine.PNG

    Thoughts/ Criticism/ Comments/ Praise/ Anything?
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  24. #24
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    I think if you shortened the top three leaves on the front and back of Lupine it'd give you more of a sense that gravity is actually working. Otherwise, just waiting on shading, good job!

  25. #25
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Like this?

    Lupine.PNG
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  26. #26
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    Yes. If anyone else would like to comment, feel free.

  27. #27
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Yayz! All that's left is shading! I am also currently working on Jackalant. It's a lot more easier, so I think it'll be ready in two days.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  28. #28
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    a lot more easier? other than grammar, I see no glaring problems that IB hasn't already had you fix. Nice job.
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  29. #29
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    "Wild Cranky Guy is drowsy!"

    "Insomniac prevents Cranky Guy from sleeping!"

    "What will Cranky Guy do?"

    "Cranky Guy posted Jackalant art!"

    Jackalant.PNG

    "Cranky Guy asks for criticism and comments!"
    Last edited by Cranky Guy; 12-15-11 at 05:02 AM.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  30. #30
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    Once again, the size is more reminiscent of Phantern than Jackalant. Either is fine but you'll have to commit to one. This one is a little rougher around the edges, maybe shading and brighter colours would help.

  31. #31
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    How's this?

    Jackalant.PNG

    Jirachi needs an overworld sprite, right? If so, will it look in all four directions, or just straight at you?
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  32. #32
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    well, what if you approach Jirachi from a different angle than from straight ahead?
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  33. #33
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    OK. Four directions it is. Wait for about a week or two. There SHOULD be a result by than.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  34. #34
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    Actually, I just found a link to a sprite sheet with overworlds, and Jirachi is on there. In fact, they have more or less every piece anyone could need here, it seems

    http://www.spriters-resource.com/ds/...er/sheet/26828
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  35. #35
    Overworlder (I think)
    Cranky Guy's Avatar
    Status: Cranky Guy is offline
    Join Date: Dec 2009
    Location: Pie
    Posts: 550

    Default

    Oh.
    http://www.pokemontopaz.net/ TOPAZ, AND PROUD OF IT!

    http://www.pokemontopaz.net/forums/s...-Guy-s-Profile - My TRPG profile

  36. #36
    RPG Administrator
    NyteFyre's Avatar
    Status: NyteFyre is offline
    Join Date: Dec 2009
    Location: .......................
    Posts: 1,082

    Default

    Well, if you want to make one yourself, to help keep Nintendo off our backs, I say go ahead and do it. I was just posting that in case IB would rather use the official.
    NINJA! <-- Click here for Profile.
    Over here is the thread.--> ADVENCHA'!



  37. #37
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    I'm always happy to have content of our own, but the canon one should do.

  38. #38
    Spriter and Gym designer
    Tyrannigon64's Avatar
    Status: Tyrannigon64 is offline
    Join Date: Nov 2010
    Location: Over there
    Posts: 764

    Default

    But those are 4th gen. Aren't we doing everything but battle sprites 3rd gen?

  39. #39
    Administrator
    ImmunityBow's Avatar
    Status: ImmunityBow is offline
    Join Date: Dec 2009
    Posts: 2,942

    Default

    There should be an overworld for 3rd gen too, if someone wants to find that.

  40. #40
    "We nicknamed her Bean"
    Reliability's Avatar
    Status: Reliability is offline
    Join Date: Dec 2009
    Location: Ontario, Canada
    Posts: 991

    Default


    Temporary hijack. If someone else could do the necessary edits, that would be awesome.


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts